HiSpec SA-R Tanker

The SA-R range of vacuum tankers are premium single axle recessed slurry tankers for farmers and contractors alike. The capacities of the SA-R range from 1350 to 3000 gallons (6,137 to 13,784 litres). Sizes from 1350 upwards to 2600 come standard on a stepped axle to dramatically lower the overall height of the tanker. HiSpec also use Alliance tyres as standard on these sizes. Alliance tyres are seen as a premium quality radial tyre for heavy-duty field and hauling jobs.

SA-R Range Single Axle – Recessed

The SA-R tanker range is designed to meets the needs of every farmer and most contractors. Additional features include a swivel hitch, complete with a sprung drawbar for maximum operator comfort. The barrel of the SA-R tankers is recessed to include large radial tyres which provide low rolling resistance, and a greater footprint to reduce soil damage. All of the SA-R range is manufactured using 6mm high quality British steel. Collared dished ends are inserted into the barrel, along with the addition of internal baffle plates and anti-implosion rings to give a strong finish. Unique to HiSpec is the double folded chassis that supports each SA-R tanker in four key areas underneath the barrel. This means that the entire underside of the barrel is fully supported across both the entire width and the length of the tank. This reduces stress on the barrel and helps to minimise weak points.

Stepped Axle

SA-R models from 1350 to 2300 gallons come standard on a stepped high speed commercial axle. This results in the rear of the tanker being lower to the ground than competitor’s models, leading to increased stability and safety on the road or on sloped grounds. The stepped axle is fitted with 420×180 hydraulic brakes as standard to increase stopping power. Air brakes can also be specified to further improve braking efficiency. HiSpec use Alliance wheels as standard on our SA-R range to further improve stability.

Jurop Pump

Features

All SA-R tankers are fitted with the following features as standard:

A-R
Swivel hitch
Sprung drawbar
Parking brake
Jurop vacuum pump
Manual pump changeover

PTO
Syphon protection tank
Anti-implosion rings
Pressure relief valve
Collared dished ends
6mm British steel
3″ sight glass (x2)
Internal baffles
6″ galvanised quick attach (x1)
6″ blanked fill point (x3)
6″ hose carriers (x1)
6″ x 15′ reinforced suction hose (x1)
LED road-lights (x1)
2″ wash-down adapter
600mm galvanised rear access point
Non-return hydraulic valve
Low trajectory splash-plate
Stepped commercial axle (3000 SA-R on a straight axle)
420×180 hydraulic brakes
Built-in round mudguards
HiSpec red paint finish